SARCA Galvanised Anchor – Excel

When the Excel was launched it was a breath of fresh air for those that wanted a new generation anchor without a roll bar, the Excel has great aesthetics and will enhance the bow of any boat, unlike roll bar designs the
Excel will fit just about any anchor housing arrangement—pull pit and bow roller designs, the Excel caters for boats from the smallest run a bout to large ocean going work boats, yachts and trawlers. When comparing the
Sarca Excel to other anchor designs it is traditional in looks only, when it comes to performance there is no comparison.
The Sarca Excel is a certified Super High Holding Power anchor, it has a cast filled ballast to ensure self righting, it is a new design of 70 percent convex, 30 percent concave, part of this concave being the cutting edges.
Excel is not a plough anchor there are no plough sheers, in their place is what are called single plain concave flukes, this being the greater part of its concave arrangement, rather than plough the substrate this new fluke arrangement is designed to compress, then directs the material-substrate over the rear of the Excel forcing itself deeper as more load is applied.
As a world first, the steel Excel version has a stainless steel cutting toe in combination with a steel fluke, this toe is not unlike the original Super Sarca toe in its shape, turned down giving instant penetration, it can be sharpened for weed or hard substrate types, being of stainless the cutting edges do not rust, all of the above makes the Excel possibly the deepest diving anchor on the market allowing incredible performance in heavy weed and many sea bed types
The Excel with its combination of convex –concave design has apertures along the sides of its flukes, whilst the anchor is being set these apertures allow water to be dragged through, this further aides the movement of compressed sea bed and assists the deep setting in hard mud or clay, these apertures work in reverse on retrieval and helps to bring up a relatively clean Excel on retrieval.With its shank being of bisaloy 80 or equivalent the build strength from the number four anchor and up of the Excel is exceptional, the bulbous on the underside of the toe aids in the Excel turning through wind and tide changes.
Features:
Tangle resistant.
Low centre of gravity self rights and keeps the toe hunting continuously to take advantage of the ocean floor.
Full range of anchors have been tested for super high holding power certification.
Unrivalled Holding Power.
Part NumberSizeBoat LengthSuits Approx. Boat WeightWeightLength to Bow (A)Internal Height (B)Length on Deck (C)Overall(W x H)
SAR-EXCELG1
1
Up to 5m 
Up to 1.2T 
7.5kg 
420mm
220mm
200m
275mm x 280mm 
SAR-EXCELG2
2
5m – 7m 
1.2 – 2.8T 
9.5kg 
460mm 
232mm 
215mm 
310mm x 310mm 
SAR-EXCELG3
3
7m – 10m 
2.8 – 3.5T 
12.5kg 
525mm 
270mm 
250mm 
350mm x 355mm 
SAR-EXCELG4
4
10m – 12m 
3.5 – 7.0T 
16.0kg 
560mm 
285mm
265mm 
370mm x 380mm
SAR-EXCELG5
5
12m – 15m 
7.0 – 15T 
22kg 
635mm 
330mm
300mm 
415mm x 425mm 
SAR-EXCELG6
6
15m – 17m 
15 – 21T 
30kg 
695mm 
350mm 
330mm 
450mm x 460mm 
SAR-EXCELG7
7
17m – 19m 
21 – 24T 
36kg 
718mm 
375mm 
340mm 
480mm x 495mm 
SAR-EXCELG8
8
19m – 21m 
24 – 28T 
40kg 
750mm 
385mm 
355mm 
500mm x 510mm 
SAR-EXCELG9
9
21m – 23m 
28 – 32T 
50kg 
770mm 
405mm 
365mm 
520mm x 530mm 
SAR-EXCELG11
11
23m – 25m 
32 – 36T 
55kg 
810mm 
410mm 
380mm 
535mm x 555mm 
SAR-EXCELG13
13
25m – 27m 
36 – 42T 
63kg 
840mm 
430mm&nb…