Manson Anchors – Supreme Anchor (SHHP) – Stainless Steel

Manson Anchors – Supreme Anchor (SHHP) – Stainless Steel
Note: Some sizes of the stainless steel versions are buy-in only (lead time approx. 16 weeks). Also available in sizes 225lb to 375lb – POA
Features:
Conforms to most common bow roller designs and self-launches.
Rollbar ensures anchor rolls itself to adopt the correct setting position.
Twin slots on the fixed shank enable use in all seabeds. If using the rockslot, (long slot) the shackle can slide forward and lift the anchor out forward if it becomes fouled.
High tensile steel shank made from 800mpa steel – 25% stronger than any other anchor.
Sharp spearhead assists anchor to pierce the toughest seafloors, ensuring greater penetration.
Lateral flaps enable the anchor to set immediately.
Reinforced double-skinned laminated nose, strengthens the forward section where most loading is concentrated.
Certified to Lloyd’s Register as a Super High Holding Power (SHHP) anchor.
Available in galvanised or highly polished stainless steel.

Part Number
Weight
Length (A)
Fluke Length Inner (B)
Fluke Length Outer (C)
Depth (D)
Fluke Width (E)

SAW-124324
7kg (15LB)
470mm
195mm
350mm
310mm
285mm

SAW-124330
21kg (45LB)
685mm
295mm
520mm
460mm
410mm

SAW-124332
27kg (60LB)
750mm
315mm
570mm
485mm
450mm